In stock
SoundTube 6.5" In Ceiling Speaker in Black with a BroadBeam® Tweeter

SoundTube CM600i In Ceiling Speaker in Black

Patented BroadBeam waveguide technology delivers a consistent dispersion pattern for maximum intelligibility and edge-to-edge coverage. One 6.5 inch polypropylene woofer and one 1.0 inch convex aluminum tweeter with FerroFluid cooling mounted to a proprietary cast-aluminum motor-board and heat sink. Rapid-installation, blind-mount, fixed-wing mounting mechanism with constant-tension design affixing to ceiling thicknesses ranging from 0.25 inch (6.4 mm) to 1.69 inch (42.9 mm). Easy-access six-position selectable tap switch for 25-, 70.7- and 100-volt applications with a transformer bypass position. Separate tool-free magnetic grille and bezel assembly with integrated safety cable for ease of install and in-field painting. Steel grille with protective powder-coated finish for lasting durability. Average sensitivity of 88 dB offers high-output capabilities and reduced amplification costs. UL 1480 (UEAY) and 2043 approved.

Included accessories: Tile bridge, Euroblock connector, paint mask, conduit plate.

Owner's Manual | Tech Sheet | Mechanical Drawing | Minimum/Maximum Ceiling | GLL | EASE 4.0 | EASE 3.0 | CLF 1 | CLF 2 | A&E Specs | Revit | DXF | DWG | PDF Drawing | UL Certificate

About SoundTube
More Information
Manufacturer's CategoryCMi In-Ceilings
Shipping Weight35 lbs / 15.88 kg
Carton Height19 in / 482.6 mm
Carton Length32 in / 812.8 mm
Carton Width14 in / 355.6 mm
CertificationsCE, RoHS, UL1480A, UL2043
Enclosure PropertiesABS, Aluminum, Ported
Included AccessoriesConduit Plate, Euroblock, Grille, Paint Mask, Tile Bridge
Optional AccessoriesBlack Metal Grille (GRL-CM6/8-BK)|Black Weather-Guard Grille (GRL-CM6/8-WG-BK)|Black Flangeless Grill (GRL-CM6/8-FLG-BK)|Tile Bridge (AC-CM8-TB)|Pre-Construction Bracket (AC-CM8-PCB)|Junction Box (AC-CM-JBOX)
Source Inputs4 Pin 5.08mm Euroblock
Backcan Diameter11.68 in / 296.7 mm
Backcan Height7.94 in / 201.7 mm
Coverage Angle (-6dB @ 2kHz) 100°
Crossover Frequency3.0 kHz
Cutout Width/Diameter12.75 in / 323.9 mm
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz)4 and 5.4
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz)5.6 dB and 7.3 dB
Frequency Response (± 10 dB)52 Hz - 22 kHz
Frequency Response (± 3 dB)69 Hz - 22 kHz
Grille PropertiesBlack, Standard-Flange, Magnetic, Powder-Coated, Paintable, Steel
Low Frequency Voice Coil1 in / 25.4 mm
Low Pass Crossover12 dB per octave 2nd order
Magnetically BoostedNo
Max. Ceiling Thickness1.91 in / 48.5 mm
Max. Continuous Power RMS90W
Max. Program Power180 W
Minimum Impedance (Ω Ohms)5.3 Ω
Minimum Ceiling Thickness0.25 in / 6.4 mm
Network Type: High Pass12 dB per octave 2nd order
Nominal Impedance (Ω Ohms)8 Ω
Tweeter Driver1" BroadBeam®
Woofer Driver6.5" Polypropylene
Sensitivity dB @ 1W/1M88 dB
Sensitivity dB @ 2.83V/1M88 dB
Tap SelectorRotary Switch
Transformer Options25 / 70.7 / 100 V, 8 Ohm direct
Transformer Taps (25V/70.0V/100V)5W/33W/33W
Visible Diameter14.76 in / 374.9 mm
Visible Height1.08 in / 27.4 mm
Write Your Own Review
You're reviewing:CM600I-BK

Related Products

Check items to add to the cart or
Copyright © MS Electronics. All rights reserved.