CM82-EZS-FS-WH

$187.00
In stock
SKU
CM82-EZS-FS-WH
SoundTube 8" 2-way In Ceiling Speaker in White with Shallow Can (tailored for use in fire signaling system)

SoundTube CM82-EZS-FS In Ceiling Speaker in White

This product has been discontinued and has a limited remaining stock. Order today, and receive 50% off this item at checkout.

An in-ceiling speaker specifically tailored for use in fire signaling system that delivers the same high quality sound expected of SoundTube speakers. Engineered for applications with limited plenum space incorporating a SoundTube-specific shallow backcan with an installed depth of 3.5 inches. One 8 inch (203 mm) polypropylene woofer with butyl rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. Easy-access five-position tap switch for 25/70.7/100-volt settings allows for easy ordering, stocking and installation. Reduced amplification costs and maximum efficiency of 88.0 dB sensitivity, 16 ohm impedance and a sealed enclosure. Superior voice intelligibility with an average coverage angle of 105° (2"“10 kHz, independently verified). Incorporates a painted steel grille with rust inhibitor for lasting durability. Adaptable to ceiling thicknesses ranging from 0.04 inch (0.9 mm) to 1.60 inch (40.6 mm). 10 µF capacitor provided on input circuit for use with DC supervision circuits. UL 1480 (UUMW) and 2043, cUL, CE (EMC Directive 89/366/EEC, EN55020, EN55013) approved.

Included accessories: tile bridge, UL-listed 0.5-inch conduit clamp, and paint shield.

Owner's Manual | Tech Sheet | Mechanical Drawing | A&E Specs

About SoundTube
More Information
ColorWhite
Manufacturer's Suggested Retail Price$374.00
UPC644216197705
ManufacturerSoundTube
Manufacturer's CategoryCM-EZ-FS Fire Signaling In-Ceilings
Carton Height6.5 in / 165.1 mm
Carton Length13.25 in / 336.55 mm
Carton Width13.25 in / 336.55 mm
Enclosure PropertiesABS Glass Fiber Reinforced, Injection Molded, Sealed
Enclosure Volume350 cu in / 5735.47 cu cm
Included AccessoriesConduit Clamp, Cover Plate, Grille, Paint Mask
Optional AccessoriesWhite Grille (GRL-CM6/8EZ-II-WH)|Tile Bridge (AC-CMEZ6/8-TB)|Pre-Construction Bracket (AC-CMEZ6/8-PCB)|Junction Box (AC-CM-EZ-JBOX)
Source Inputs4 Pin Ceramic Terminal
Shipping Weight8.5 lbs / 3.86 kg
Backcan Diameter9.67 in / 245.6 mm
Backcan Height5.75 in / 146.1 mm
Crossover Frequency3.0 kHz
Cutout Width/Diameter10.5 in / 266.7 mm
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz)5.4 and 7.2
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz)5.5dB and 8.6dB
Frequency Response (± 10 dB)65 Hz - 22 kHz
Frequency Response (± 3 dB)92 Hz - 18 kHz
Grille PropertiesStandard-Flange, Friction-Fit, White, Paintable, Painted, Steel
Low Frequency Voice Coil1 in / 25.4 mm
Low Pass Crossover6 dB per octave 1st order
Magnetically BoostedNo
Max. Ceiling Thickness1.6 in / 40.6 mm
Max. Continuous Power RMS64 W
Max. Program Power128 W
Minimum Impedance (Ω Ohms)16 Ω
Minimum Ceiling Thickness0.04 in / 0.9 mm
Network Type: High Pass6 dB per octave 1st order
Nominal Impedance (Ω Ohms)16 Ω
Tweeter Driver1" Silk Dome
Woofer Driver8" Polypropylene Cone w/ Butyl Rubber Surround
Sensitivity dB @ 1W/1M89 dB
Sensitivity dB @ 2.83V/1M86 dB
Tap SelectorRotary Switch
Transformer Taps (25V/70.0V/100V)1.3W/10W/30W
Visible Diameter11.75 in / 298.5 mm
Visible Height0.34 in / 8.6 mm
Write Your Own Review
You're reviewing:CM82-EZS-FS-WH

Related products

Check items to add to the cart or
Copyright © MS Electronics. All rights reserved.