IPD-SM82-EZ-II-WH

IPD-SM82-EZ-II-WH
Find a Reseller
In stock

This item has been discontinued. Limited stock available.

SoundTube 8" IP-Addressable, Dante-Enabled Speaker in White

SoundTube IPD-SM82-EZ-II IP-Addressable Speaker in White

The IPD-SM82-EZ-II is a Dante-enabled, digital end-point solution in a surface-mount loud speaker. This speaker includes a 40 W PoE amplifier for simplified installation and set up. Driver components consists of one 8.0 inch polypropylene woofer and one 1.0 inch soft dome tweeter in a ported enclosure. The included pre-mountable surface-mount bracket allows for quick and easy installation and the powder-coated aluminum grille keep the speaker looking good in most environments. The system is UL 60065 approved. Included accessories: Safety cable, wall mount bracket, conduit connector and optional port plug.

Note: SoundTube IPD speakers are NOT compatible with PoE++. 30W PoE maximum (or 40W maximum with STNet Switch II)

Owner's Manual | Tech Sheet |  Revit |  Applications Guide | A&E Specs |  STNet Control Center Software User Manual |  STNet/Dante Firmware Download

About SoundTube
More Information
ColorWhite
UPC644216224005
ManufacturerSoundTube
Manufacturer's CategorySTNet IP-Addressable and Dante Series
Depth9.88 in / 250.95 mm
Height18 in / 457.2 mm
Width/Diameter11.5 in / 292.1 mm
Shipping Weight15.4 lbs / 7.0 kg
Carton Height17 in / 431.8 mm
Carton Length21.5 in / 546.1 mm
Carton Width14.25 in / 361.95 mm
CertificationsCE, IP65, RoHS, UL60065
Enclosure PropertiesHigh Impact Polystyrene
Included AccessoriesMounting Assembly, Mounting Hardware, Port Plug, Safety Cable
Optional AccessoriesWhite Grille (GRL-SM82-WH) | White Weatherboot (WEATHERBOOT-S-WH) | Port Plug (AC-SM8-PP)
Source InputsRJ45 Ethernet Port
TAA Compliant (Trade America)No
BAA Compliant (Made in USA)No
Coverage Angle (±6dB @ 2kHz) 70° Horizontal / 90° Vertical
Crossover Frequency2.5 kHz
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz)5.2 and 12.0
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz)6.2 and 10.8
Frequency Response (± 10 dB)38 Hz - 20 kHz | Sealed: 50 Hz - 20 kHz
Frequency Response (± 3 dB)50 Hz - 20 kHz | Sealed: 70 Hz - 20 kHz
Grille PropertiesAluminum, Powder-Coated
Low Frequency Voice Coil1.5 in / 38.1 mm
Low Pass Crossover12 dB per octave, 2nd order
Max SPL @ 1M101 dB
Network Type: High Pass12 dB per octave, 2nd order
Tweeter Driver1" Soft Dome
Woofer Driver8" Polypropylene Cone w/ Butyl Rubber Surround
Copyright © MS Electronics. All rights reserved.